iPhone 15 Pro Max stuck at 1%: board charging work.
Actual workshop footage shows the board work behind a charging complaint and a later input-power reading.
Read the guideThese guides are written from real Fixaviour bench cases. They explain what a symptom looked like, what the true fault turned out to be, and why specialist diagnosis matters before replacing the device.
Filters the records on this page. Your search stays in your browser.
Real jobs from the Fixaviour bench: dead devices, no-WiFi faults, liquid damage and board-level diagnosis.
Actual workshop footage shows the board work behind a charging complaint and a later input-power reading.
Read the guideA damaged battery-connector data line explains why this phone could not report battery information normally.
Read the guideActual footage from the charging-circuit investigation, with the observed work separated from assumptions about the cause.
Read the guideA damaged PP_VCC_BATT connection left this phone dependent on external power.
Read the guideU4000 reached about 93°C during controlled testing and was replaced after the fault was isolated.
Read the guideFive damaged layer pads—not the replacement screen—were behind the missing touch response.
Read the guideThe recorded test moved from 0.000 W to roughly 12 W and a working screen.
Read the guideFour OL readings at the LCD connector led to a discontinuity across the backlight filter.
Read the guideA missing PP_VAR_USB_RVP_R supply led to Tigris U4000, not a blind battery or port replacement.
Read the guideA USB-C connector replacement addressed the recurring port warning on this 10th-generation tablet.
Read the guideThe port was replaced without trace reconstruction, then checked electrically and on a monitor.
Read the guideA connector-level repair followed by diode readings and verified picture and sound.
Read the guideA correctly identified Series S repair with no trace reconstruction required.
Read the guideA real case where a phone looked completely dead, but the fault was a specific baseband power-management short.
Read the guideA dead-device case where the answer came from isolating the short, not guessing at parts.
Read the guideWhy a no-WiFi iPhone can be a board-layering issue rather than a simple antenna or software problem.
Read the guideA boot-loop case where corrosion near the battery connector changed the whole diagnosis.
Read the guideMicroscope demonstrations of reconstruction and reballing, kept separate from complete customer case outcomes.
Copper reconstruction, connector fitting and UV-cure protection after the port pulled away from the board.
Read the guideCleaning, protective coating, UV curing and reballing shown without claiming a completed data recovery.
Read the guideA technique demonstration kept separate from any unverified signal or Wi-Fi diagnosis.
Read the guideThe symptoms we see repeatedly, what they can mean, and why the obvious part is not always the failed part.
A broader guide built from repeated dead-device cases: shorts, charging-path faults, board damage and why “dead” is never the diagnosis by itself.
Read the guideWhat repeated cases show about no-charge symptoms: when they are ports, when they are rails, and when they imitate more serious faults.
Read the guideHow corrosion can mimic storage, display, charging or power faults before the board is inspected properly.
Read the guideHelp with sending a device in, packing it safely, checking repair progress and understanding warranty cover.
A customer-friendly walkthrough of the full process: booking, shipping, diagnosis, quote approval, repair and return.
Read the guideWhat the tracking page shows, why email matching is used, and what each status means for your repair.
Read the guideWhat is covered, how to start a claim, and how it fits into the repair aftercare process.
Read the guideIf a guide sounds like your device, tell us what you’ve noticed. We’ll assess it, explain our findings and give you a quote before you decide on repair.